Tines

Long_Live_Drive_rdax_169x300.jpg

Long-Life-Drive: Quality within the system

Long-Life-Drive is the optimised drive system for all AMAZONE rotary cultivators that ensures an extended operating life, maximum smooth running and a high resale value. Gear wheels and bearings run in a single oil bath and so are maintenance-free – there are no grease nipples. (1) Robust gearbox (2) Highly-hardened spur gears with large teeth contact area (3) Exact spacing of all bearing seats for a maximum smooth running (4) Highly-hardened spur gears with large teeth contact area (5) Large clearance between tool carrier and smooth trough base for blockage-free mulch sowing and optimum though passage (6) Double sealing system with cassette sealing ring against oil loss and labyrinth seal against ingress of plant fibres and dirt (7) Tine carrier and shaft forged from one piece with large shaft Diameter, KG and K Rotary cultivator ∅ = 60 mm (8) Quick + Safe System with proven, tool-less tine change solution and integrated stone safety protection

More information + Less information -
Kreiselgrubber_rdax_170x171.jpg

KX rotary cultivator – the all-rounder

The KX rotary cultivator, in a working width of 3 m, is ideally suited for seedbed preparation on medium to heavy soils. The benefits of the rotary cultivator: • Short set up times by the proven tine quick change system • Very flexible in operation – can be, from choice, operated with trailing tines or with “on-grip” tines • More rigidity – reinforced trough profile, thicker shaft diameter and stronger tines • Loosening of hard and compacted soils without any problem • Intensive incorporation of straw and other organic matter

More information + Less information -
Zapfen_KE_d1_190129_rdax_170x212.jpg

The direct drive!

A simple angle drive redirects the power only once and connects directly with the tine carriers. • That saves fuel as fewer gear wheels mean less internal friction, less heat generation and less wear. • The highest torques occur directly on the tine carrier shafts, resulting in an increased durability plus a high degree of safety and protection for the tractor. • The tine carrier and the shaft are forged from one piece. With a shaft diameter of 45 mm.

More information + Less information -
Zapfen_KG_1zu1_d1_190129_rdax_170x172.jpg

Strength is trumps! Rotary cultivators from AMAZONE

Strong rotor carrier: The tine carrier and shaft are forged in one piece from high grade steel. The shaft diameter is a heavy-duty 60 mm. The tine carrier shaft is supported by bearings with the optimum bearing spacing. Trough sealing is done with a special cassette seal with an optimum sealing effect and maximum service life. In addition, labyrinth seals prevent the ingress of plant fibres. Robust trough: The high-standing 8 mm thick gear case made in a trough-type profile with double skin base and welded-in bearing sleeves is extremely torsion resistant, which enables it to easily withstand the high forces that occur when transporting heavy packer rollers and pack-top mounted seed drills without cumbersome external bracings. Spur gears and bearings are oil-immersed and thus maintenance-free – no grease nipples. • Tine carrier and shaft are forged from one piece. The shaft diameter is 60 mm: strong as a bear.

More information + Less information -
Kreiselgrubber_rdax_170x171.jpg

KX rotary cultivator – the all-rounder

The KX rotary cultivator, in a working width of 3 m, is ideally suited for seedbed preparation on medium to heavy soils. The benefits of the rotary cultivator: • Short set up times by the proven tine quick change system • Very flexible in operation – can be, from choice, operated with trailing tines or with “on-grip” tines • More rigidity – reinforced trough profile, thicker shaft diameter and stronger tines • Loosening of hard and compacted soils without any problem • Intensive incorporation of straw and other organic matter

More information + Less information -
Centaya_Detail_SmartCenter_d0_ah_IMG_6220_d1_171004_rdax_170x92.jpg

Coulter pressure adjustment

As all the coulters are suspended in a parallelogram guided frame, a central and stepless adjustment of the coulter pressure is possible. It is possible, for instance, in the area behind the tractor wheels, to increase the coulter pressure by another 6 kg using additional tensioning springs. As an option, hydraulic coulter pressure adjustment is available allowing the comfortable matching of the coulter pressure from the tractor cab. The hydraulic coulter lift enables the coulters to be raised by up to 145 mm. This coulter lift is of great help when working in field corners.

More information + Less information -
amatron3_14_06.jpg

Task Controller (job management)

Task Controller allows the data recording on the machine and the data exchange between the machine and a farm management system. For this the standardised ISO-XML data format is utilised. Depending on the level of sophisication possible - download or the creation of jobs, - processing of jobs, - documentation of the work done, - exporting the data for the further processing with the aid of a USB stick. TC-BAS – Task Controller basic Describes the documentation of summarised values which make a sensible overview of the work completed. The implement makes available the values. The data exchange between field job file and Task Controller is carried out via an ISO-XML data format. Thus, jobs can be conveniently imported into the Task Controller and/or the finished documentation can be exported again. TC-GEO – Task Controller geo-based The additional possibility also exists to collect site related data – or to plan site specific related jobs, for example via application maps.

More information + Less information -

Image film AMAZONE 1883